Calpeda Submat ‘Pump In-Tank’ Booster Sets. •
Our MXS range of submersible multi-stage #Pumps teamed up with our Easymat variable speed drives make for a powerful, yet compact packaged #BoosterSet . •
We carried out a site visit to a large London property consisting of 18 flats over 6 floors which were suffering poor pressure from the multiple outlets. Our distributor is already a big fan of our booster sets so when we put forward this split tank submersible set to overcome the tight site access it was the perfect solution. •
Submat pressure boosting set's utilise our stainless steel MXS 508 pumps inside a GRP insulated tank. A pair of Easymat drives clamped to the manifolds on the front of the tank control the pumps to maintain a constant pressure across the building whilst achieving optimal efficiency. •
Calpeda Submat ‘pump in tank’ booster sets are available in a wide variety of one and two-piece tank sizes.
Ein Bonus ....Du hast die Möglichkeit ein weiteres Set „das Booster“ zum exklusiven Preis zu erhalten, das nur neuen Repräsentantinnen in ihren ersten 30 Tagen bei Younique zur Verfügung steht.
Darin enthalten ist 💕TOUCH MINERAL Flüssig-Foundation
💕TOUCH MINERAL Skin Perfecting Concealer
💕TOUCH GLORIOUS Gesichts- und Augen Make-up Grundierung
💕Flüssig-Foundationpinsel und ein 💕Limitierte YOUNIQUE Tasche mit Kordelzug.
#boosterset ,#younique ,#youniquemakeup ,#schminken ,#younique ,#youniqueprodukte ,#youniqueprodukts
A very busy start to the month at Calpeda!⠀
Our production team have just finished this bespoke variable speed system - x2 Calpeda NMS 80/250D close-coupled centrifugal #Pumps with 30 kW motors located on a custom frame base being controlled for maximum efficiency by our IMAT inverters. ⠀
Each pump has its own IMAT offering individual control over each pump via the clear LCD display which shows the speed, current pressure and amps being drawn from the motor. Soft-start comes as standard (hydraulic shock protection) along with multiple other levels of protection against damage to the equipment should the system run dry or if there is a spike in power. ⠀
IMAT's intelligent PrP (Pre-Pause Frequency) will calculate the exact speed to stop the motor from running for maximum efficiency which is important for large motors. The system can also be set to run at a defined lower pressure between certain hours if required utilising IMAT's night mode. ⠀
Working with Calpeda you can be sure that your solution has been fabricated to the highest standards by a manufacturer who put's quality and reliability first, builds to a strict ISO approved processes, and tests everything thoroughly to ensure that it's right first time - every time! ⠀
☎️ 01869 241441⠀•
At Calpeda UK we are extremely proud of our #ISO accreditation’s;
ISO 9001 - Quality Management System
ISO 14001 - Environmental Management System
ISO 50001 - Energy Management Systems
We worked hard to achieve and maintain our approvals, and even harder to improve on the standards we initially set.
For ISO 9001 we have strict quality guildlines when it comes to manufacturing at Bicester, meaning that each #BoosterSet built follows an exact procedure resulting in a quality, fully tested product every time. •
When it comes to the environment we want to make sure we do all we can to protect it and be a responsible company and as such we implemented measures such as designated recycling points for all waste materials and consumables.
ISO 50001 means that we are continually looking at our energy consumption across our sites, from the lighting in production and offices to the fuel consumption on our vehicles.
Ongoing improvements throughout Calpeda UK, along with independent audits across both our sites in Bicester, Oxfordshire and Pontefract, West Yorkshire ensure that we remain a sustainable manufacturer offering the highest levels of quality and efficiency.
💜 V.I.P. BRANDHEISS 💜
Jetzt nur 80,25 € für dein eigenes #Business oder eine mega Make-up #Tasche 😱😍😱😍😱😍 Wenn nicht jetzt bei dem #Preis - wann dann❓❓❓ In dem #Set erhältst du (Produkte können etwas abweichen): 👜Oil Control Maske 👜Beachfront Bronzer in Malibu 👜Kajal in perfekt
👜Splash in Stubborn 👜Quad Lidschatten Palette mit Discreet, Witty, Gentle, Alive 👜Highlighterstick in Beneveland 👜Lip Bonbon Pflegestift in Vanilla Milkshake 👜Epic Mascara 👜3D Mascara 👜Esteem Wimpernserum
👜Blending Pinsel 👜Lipgloss in Lovesick 👜Lipgloss in Lunar
Das ganze hat einen Produktwert von ca. 400€ 😍 💜 Zusätzlich bekommst du ab #Regestrierung 20% auf deine weiteren #Bestellungen 💜 Zusätzlich bekommst du einen 17€ #Gutschein 💜 Zusätzlich bekommst du einen LED #Spiegel (ab 1.8. In deinem Warenkorb wenn du dich im Juli regestrierst) ‼️UND ZUSÄTZLICH HAST DU DIE CHANCE AUF DIESES ANGEBOT💪🏻‼️🔽🔽🔽🔽 #Boosterset : 👜Faceprimer 👜Liquid Foundation in der Farbe deiner Wahl 👜Liquid Foundation Pinsel 👜Concealer in der Farbe deiner Wahl
Gesamter Warenwert: 150.50€ 💃DU ZAHLST NUR 105 € & BEKOMMST DEINE 20% NOCH ZUSÄTZLICH💃
Deine Wahl - Nutze die Produkte nur für dich oder starte durch 💪🏻 Hier kannst Du Dir das Starterkit schnappen 😍
This beauty was built, fully tested and leaving our Bicester production facility all within 72 hours. •
Our ‘3MXH1606/A-TTB-24’ #BoosterSet is equipped with three of our #WRAS -approved horizontal multistage #Pumps , each rated for 3 ltr/sec @ 5.3 bar sitting on a custom base fabricated in-house to fit the plinth in the plant room.
All three pumps have their own IMAT variable speed drive fitted to the terminal box, with a pressure transducer per IMAT and individual display showing exactly what each pump is doing. The clear and easy to read display is the same layout as our Easymat utilises with everything fully configurable from the inverter itself. No remotes or apps needed! •
With dual volt free contacts per IMAT, hydraulic shock protection, dry run protection, built-in motor warming, auto re-start, night mode as well as no reliance on a ‘master pump’ thanks to auto changeover and intelligent pump switching. •
Calpeda UK have provided solutions for moving water for many many years - supporting independent distribution and chosen by OEM’s for our quality and reliability. • 📧 email@example.com
There’s plenty underway in production. It’s set to be a very busy week! •
Calpeda is the only name to think of when it comes to pumps and booster sets!
It’s those subtle little details that make a big difference ...
➡️ Huge Product Range. Calpeda build all of our pumps in Vicenza, Italy - utilising our nearby foundry for cast and bronze components ensuring a quality build throughout. No cheap foreign labour.
➡️ Every Pump Tested. No batch testing.
➡️ ISO approval. Calpeda UK are ISO 9001, 14001 and 50001 approved and have worked hard to achieve and maintain this standard. ➡️ Manufacturer Built Product - full continuity of all components used in our booster set builds. ➡️ Individual Calpeda variable speed drives per pump so no need for sizeable panels taking up valuable space.
➡️ Each Calpeda Drive has its own display so no need to cycle through displays to find the right information.
➡️ Full UK technical support, on the phone and in person.
➡️ BPMA member for over 25 years!
Maybe they’re not so subtle after all 😉
As one of the industries leading manufactures of bespoke #BoosterSet solutions, Calpeda have the flexibility and knowledge to design a packaged solution to suit your needs. •
After carrying out a site visit with the customer, we designed this small footprint (1100x800x1700mm) tank above AGAP pressure boosting set delivering 1.5 ltr/sec @ 4.6 bar per pump from our #WRAS -approved MXH #Pumps .
With minimal space in the plant room, access is also very tight so this set is supplied with a horizontally split tank and a vertically split frame which is easily dis-assembled and re-built when in situ. •
Our Easymat variable speed drives regulate the starting and stopping of the pumps via external pressure transducers ensuring constant pressure 24/7 whilst offering optimum efficiency. Unlike a lot of budget competitors, Easymat's unique manifold clamp system provides cooling totally independent of pumped liquid enhancing it's unrivaled reliability in the marketplace. Large backlit LED display makes operation simple, and as all booster sets are fully tested to the operational duty and delivered 'ready to boost' it's easy to see why more and more people choose Calpeda everytime! •
From site visit to delivery with our customer in 3 weeks, this is what we do!
💜💜Bilder von meinem Live Starterset+Boosterset💜💜 Ich zeige euch, sie ihr eine Ersparnis von über 3⃣5⃣0⃣€ 😱
Habt und noch viel viel mehr 🚨🚨🚨🚨🚨
Aber nur noch bis 01.07. um 8.59 Uhr.
💜💜Wer jetzt nicht spart ist selber Schuld 💜
Diese Produkte sind alles in der VIP Tasche und im Boosterset enthalten und hab ich benutzt
💜 Liquid Foundation ( ich hatte cashmere)
Das Boosterset bekommt man 30 Tage lang im Set. Aber nur, wenn man sich vorher die VIP Tasche geholt hat.
💜 3D Fiber Lashes Mascara
💜 Epic Mascara
💜 Kajalstift in PROPER (Braunton)
💜 Quadpalette mit den Farben WITTY, ALIVE, GENTLE und DISCREET
💜 Splash, Flüssiglippenstift in STELLAR
💜 Lipbonbons in VANILLA MILKEHAKE
💜 Creme-Stick Luminizer in BENEVOLENT
💜 Breachfront Bronzer in SUNSET
💜 Blending Pinsel
💜 Lipgloss 10-er Set Proben
💜 Proben von unseren 3 Masken (Oilcontrol, Detox und Gesichtspeeling)
💜 Liquid Foundation Proben
💜 17€ Gutschein
💜 Lila Tasche 💖💖💖💖💖Schlagt zu und holt euch diese mega Tasche 😍😍Nur noch bis 01.07. um 8.59 Uhr VERSANDKOSTENFREI 😍😍 Bei Interesse oder Fragen schickt schickt mir eine PN. Ich freue mich auf euch. 😘😘
💜Bei Interesse an Beautyworkshops oder Einzelberatung einfach melden 💜
Some more #BoosterSet conversions by our service team - this time we have 2 examples of old-style Calpeda panels being swapped for our Easymat variable speed inverter. Having experienced the absolute reliability that Calpeda equipment offers over the years, these customers decided it was time to upgrade and reap the benefits that our fantastic single phase Easymat variable speed drive system offers. •
Calpeda's Easymat has been an industry standard for a long time - there is a number of very good reasons for this; • ✅ Non-water cooled variable speed drive via patented clamp system.
• ✅ Dry run protection and auto restart on power failure.
• ✅ 1 external pressure transducer per Easymat offering accurate pressure readings across the system.
• ✅ Cyclic changeover of lead pump meaning that wear across the system is even. •
Read more about Easymat ➡ https://goo.gl/KAK8ED
A cracking install of a Calpeda MXV80-4804 IMAT #BoosterSet by one of our valued independent distribution partners, Anglo Pumps PLC. •
Utilising our MXV804/C #WRAS -approved multistage #Pumps , each one rated for 12.8 l/s @ 5.1bar paired with our IMAT variable speed drives for maximum efficiency we built, tested and delivered our 3 phase booster set to site to replace the old pressure switch controlled set-up that was in place. •
IMAT is an intelligent variable speed drive, using only 6 buttons to programme and control the booster set offering various operational modes such as constant pressure, proportional pressure, constant temperature or flow. Each drive has it's own pressure transducer with cyclic change-over and auto restart as well as offering protection from hydraulic shock, dry running, over and under voltage.
What really makes our IMAT different is the PrP (Pre-Pause Frequency) - this features means the IMAT will work out the optimum frequency to switch the pumps off rather than running down to 30hz (the usual minimum running frequency) making it the most efficient pump variable speed drive in the market place. •
Frustrated and fed up with poor service, lack of knowledge and slow quotation response from your chosen pump manufacturer? •
We often hear the above reasons given by new customers, closely followed by how amazed they were at the speed Calpeda quoted and then delivered. •
We pride ourselves on this. The service you will receive from Calpeda is second to none! •
Quick response to enquiries, excellent technical support, after sales and a well equipped experienced service department to commission and assist where needed. •
It’s easy to get in contact with us - you can use any of the following methods; •
Head Office & Production Facilities 🏢 6-8 Wedgwood Road, Bicester, Oxfordshire, OX26 4UL •
UK Technical and Training Centre 🏢 Grove House, Friarwood Lane, Pontefract, West Yorkshire, WF8 1DX • 📞 01869 241441 📠 01869 240681 📧 firstname.lastname@example.org 🌍 http://www.calpeda.co.uk • 💼 http://linkedin.com/company/CalpedaUK 👤 http://facebook.com/CalpedaUK/ 📱 http://instagram.com/CalpedaUK/ 🐦 https://goo.gl/Q5NwrL •
Calpeda UK has over 25 years of extensive experience and knowledge in water pumps and cold water booster set manufacturing. Supported by Calpeda Italy’s rich heritage of nearly 60 years of innovation and manufacture of motors and water pumps, quality has always remained at the heart of every product we put into the market place.⠀
With a vast range of pumps all manufactured and individually tested by Calpeda Italy, and our custom built cold water booster sets manufactured in Bicester, Oxfordshire (to ISO9001 standards) using our highly regarded Easymat and IMAT inverters means that we have the power to deliver. ⠀
Proven over many years and trusted by the biggest names in independent pump distribution, facilities management and water treatment to name a few Calpeda is a name that can be relied on.⠀
Calpeda equals total reliability.⠀
A beautiful pair of Calpeda three phase IMAT Booster sets on their way out of the door today 👍🏻
Built by our team of expert fully trained production staff in Bicester, Oxfordshire at Calpeda's production facilities, using our #WRAS -approved multi-stage MXH #Pumps , along with our IMAT variable speed drives.
✅ Every pump produced by Calpeda is tested at the point of manufacture in Italy. •
✅ Fully pre-configured and water pressure test your #BoosterSet in Bicester. •
✅ ISO 9001 (14001 & 50001) approved production process ensuring the highest quality builds. •
✅ Fully compliant with the BPMA's #BuyWithConfidence initiative. •
✅ Our variable speed drives have zero reliance on remotes, apps and no generational changes to contend with either - they just work!
☎️ 01869 241441
Calpeda’s single phase Easymat inverter is trusted by many well known distributors and OEM’s throughout the industry. •
It’s super easy to use, doesn’t require any add-on remote controls, mobile phone apps or added hardware.
Should there be a power surge the Easymat will shut off to protect the pumps and equipment automatically restating when safe to do so.
Unlike various cheap inverters drives being offered by manufacturers and assembly houses ours has an external pressure transducer, is not water cooled and has a clear and easy to use interface.
With auto pump changeover and a transducer per Easymat on multi-pump sets, dry run protection, float switch input and volt free contacts as standard. •
If you want to see exactly how easy it is to use get in contact 😊
Calpeda are pleased to announce that Jon Bennett has been appointed to the role of General Manager of its UK subsidiary Calpeda Limited.
Jon has been a member of the Calpeda UK team for a number of years in various roles most recently National Sales Manager.
The new appointment is part of a series of management changes scheduled to take effect over the next few months following Ken Hall’s new appointment with Calpeda S.p.A as Regional Manager, head of operations across sub-Saharan Africa. Ken will continue to be a member of the UK board of Directors, retaining his position of Managing Director, but Jon will now be responsible, reporting to the board, for the day to day operations of the company.
Everyone at Calpeda congratulates him on his hard won appointment as he now joins the Calpeda family team as one of our senior managers responsible for a subsidiary.
What makes our pumps special? After an all-round hydraulic test, here’s another aspect that explains Calpeda’s special approach to its products.
This time our concentration is on pump casings, in particular those of the NM series centrifugal pumps.
The starting point is the UNI-EN 12162 Standard, namely the standard that specifies the hydrostatic test procedure to be applied to the pressurised parts of all types of pumps for liquids.
This standard demands that pumps pass a hydrostatic test, at a pressure that is 1.4 times greater than the maximum limit declared by the product.
Our enthusiasm for research and care during production constantly leads us to demand an increasingly higher level of quality; in this specific case it drove us to go beyond the requisites of the standard.
While developing our NM series single-block centrifugal pumps, we determined that the hydrostatic test set by the standard was not enough to guarantee maximum pump casing reliability; in fact, a centrifugal pump restarts continually, therefore the casing undergoes stress caused by variations in the speed of the liquid and its pressure.
Calpeda pump casings = 100% reliability: this is the simple equation behind development of the new PN16 pump.
In substance, we studied a new control protocol, additional to the one indicated by the standard, on the basis of which all the casings of Calpeda NM centrifugal pumps are tested using pressure cycles from 0 to 16 bar for a minimum of two years of life.
To satisfy the new protocol, we concentrated mainly on the casing material. We replaced the grey cast iron with spheroidal cast iron which has better mechanical characteristics and which, being ductile, can deform plastically under loads before breaking. This translates into an advantageous resistance/weight ratio, something that allows us to reach our objective of resistance to pressure without increasing the product weight.
Another Calpeda IMAT #BoosterSet tested and ready to be dispatched to one of our independent distribution partners. •
This set comprises x3 MXH-F3204 horizontal multi-stage close coupled #Pumps with x3 Calpeda IMAT variable speed drives. The MXH (and MXV) range of multi-stage pumps are fully #WRAS approved and this model packs a 7.5 kW motor with flanged ports delivering a working pressure of 8bar across the set. •
Our IMAT inverter offers unparalleled reliability and is very user-friendly (sporting the same interface as our 1ph Easymat inverter). •
Some key benefits of IMAT are; • ✅Protection against hydraulic shock (water hammer) ✅Protection against over/under current supply ✅Cyclic changeover of lead-pump ✅Pressure transducer per unit (external) ✅Built-in motor warming ✅No remotes. No apps. No gimmicks. ✅Ability to retro-fit to existing equipment via wall-mounting bracket •
This booster set (as with all Calpeda booster sets) falls in-line with the BPMA's #BuyWithConfidence legislation and is fully CE marked with all supporting documentation. • 📞 01869 241441 📧 email@example.com 📍 @CalpedaLtd 🔗 https://goo.gl/jCjq4q •
Another quality job carried out by one of our distribution partners, swapping out an old inefficient pressure switch controlled #BoosterSet with a fresh Calpeda variable speed Easymat set.
The customer will benefit from energy savings and unparalleled reliability thanks to Calpeda’s WRAS-approved multistage pumps and fantastic inverters used on our cold water booster sets.
Designed, manufactured and fully tested to stringent ISO 9001, 14001 and 50001. Calpeda has been a British Pump Manufacture Association member for over 25 years and continue to provide innovative solutions for moving water.
Based in Manchester, Pressboost have been busy replacing defunct and tired #BoosterSet equipment with Calpeda Easymat sets. These guys know how reliable and easy to use our Easymat inverters are and that we supply them in accordance with the #BPMA#BuyWithConfidence initiative (fully labelled, supplied with all required paperwork), fully tested to the desired duty and delivered ready to go 👌🏻 •
Thank you Pressboost for choosing Calpeda. • ☎️ 01869 241441 📧 firstname.lastname@example.org 📍 @CalpedaUK 🔗 https://goo.gl/798a63 •
Outstanding pumps and booster sets that come with outstanding service as standard. ⠀
A reliable and reactive service team on the road in fully kitted vans who carry out service visits as part of contracts, pump and booster set commissioning and conversations from fixed to variable speed systems too.⠀
Add to that our knowledgeable technical sales team who are on-hand to size up any pump or #BoosterSet , whether replacement or new install.⠀
Oh, and quote turn-around times? - they’re super quick!⠀
We have the ability to help.⠀
☎️ 01869 241441⠀
A couple of photos of an Easymat variable speed booster set dispatched yesterday afternoon. Our customer order two identical sets and of course, Calpeda delivered in a few days.
Our Easymat variable speed drives are well regarded throughout the industry as being robust, reliable and easy to operate - we fully water pressure test at the desired operating duty prior to dispatch so we know when a Calpeda booster set arrives on sire it’s ready to do its job. ✅ Non-Water Cooled Variable Speed Drive
✅ External Pressure Transducer Per Unit
✅ Protection Against Dry-Running, Over & Under Supply Current
✅ Auto Restart
✅ Cyclic Changeover Of Lead Pump ✅ Easy & Clear LCD Display
Built in Bicester, Oxfordshire - used and trusted the world over! ☎️ 01869 241441
Check out this mains water booster set we recently manufactured for a 'speciality chemicals' customer. The twin multi-stage pumps came complete with individual invertors and a control panel #pumpporn#water#pumps#boosterset#multistagepumps cdrpumps.co.uk/waterbooster/